Mother’s Day 2019 – Mom Bike Checks

label
Mother's Day bike checks 2019

Happy Mother’s Day to all the mountain bike moms! We love those moms who enjoy mountain biking and/or encourage their kids to ride. Let’s take a look at what some of the moms are riding this season. Many thanks to the moms for taking time to share the photos and words for this post. We hope you enjoy your ride today!

Kaylee Gibb And The Pivot Mach 6

Kaylee with her kids

Kaylee Gibb and her three children. Photo by Ryan Gibb.

With the first child we decided to drop some coin on a little Giant strider – knowing more kids would get to use it! Well the drunk lady who drove through the yard and ran it over had different ideas. After pulling it out of the ground and un-bending a few parts, we adding some trike handlebars to it. That fixed it! That strider has now been passed on to the third kid! Worth EVERY penny.

The moment they can glide – they can pretty much pedal with a few tries on a pedal bike… in comes the Spawn. Same thing; cost a ton of coin but they hold their value, have decent brakes, and are quite light which was the most important thing on our list. This bike has gone through 2 and will soon be passed on to the third child (plus still sell it when we’re done for a decent amount).

My feeling on bikes is you put into it what the kid’s going to get out of it, not what your money says you can buy. Sure there are $2000 bikes out there for my 6 year old, but she’s not into it that much… yet. She likes to ride occasionally with me and push herself with her peers around, so we opted for a well priced Norco that has good disc brakes and a little bit of travel to keep her from fatiguing too quickly. She also has plenty of gears that she still isn’t super sure what to do with!

Pivot Mach 6

My Mach 6 is next level. Definitely the smallest bike I’ve owned minus the DJ. It’s an XS and feels pint sized! I LOVE IT! Its built a bit tough for most because of the style of riding we do, but it could be built up extremely light and be an XC killer and handle some seriously technical steeps no problema! It is a good family bike as well for growing kids. I’m 5’3″, 115lb..and not growing! It can fit the older siblings and be passed down for sure! It’s a bit of an investment, but for the person who loves to ride, ride comfortably, ride aggressively, and likes to progress… it’s a sure fit!

Kaylee riding with chlldren

Riding in the Utah desert. Photo by Ryan Gibb.

Kaylee with kids and caterpillars

Stopping to investigate the caterpillars. Photo by Ryan Gibb.

Courtney Nash And The Transition Sentinel

Courtney and her daughter

Courtney Nash and her daughter. Photo by Eric Brown.

I can’t wait to get back in the bike park with my 7 year old daughter! Her little brother is progressing with the bike stuff as well, but skiing may be his true sport. Cleo got a 20 inch Norco Fluid and she really likes that thing. She’s learning the reality of having a full-suspension kid bike with the squish, but having to pay for the weight on the climbs.

Transition Sentinel Carbon GX

My new bike day was just a over a couple of weeks ago and I ended up with a 2019 Transition Sentinel Carbon GX. At first I didn’t want a 29er, but after I demo’d it for a few hours, this was a quick upgrade from my Patrol. I can’t get over how well my bike corners – even at high speed. Every moment where my brain screams, “You’re going to slide out!”, I mentally and physically prepare to adjust my body position and weight, but the bike never lets go. Even through long, big, loose corners. I keep pushing it and pushing it, but the bike won’t give up. All the normal attributes of a 29er are prevalent, but the Sentinel’s performance on technical terrain and jumping were initially surprising. It took me a few rides to dial in the suspension and now I’m pretty much in love.

Photos by Eric Brown.

Courtney would like to thank: @transitionbikes and encourage everyone to donate what you can to the WMBC (Whatcom Mountain Bike Coalition). They’re the trail organization in Bellingham responsible for tracks including Unemployment Line, Evolution, and several more.

Sarah Paxson And The Kona Hei Hei

Sarah Paxson and the Kona Hei Hei

Sarah Paxson is expecting a bike ride – and a second child. Photo by Spencer Paxson.

Kona Hei Hei

I’ve been riding the Kona Hei Hei since 2013, and really enjoy the current iteration that I am on, the 2016 Hei Hei Race DL. For me, the bike suits my needs because it is a cross-country, endurance-oriented bike, but is also confident and playful on the trail. I stated riding mountain bikes in 2010, and there was a time when I enjoyed a bigger bike for hitting jumps, steep lines and pushing my skill limits. But these days I feel fulfilled with a “low air diet” and really value getting out for longer missions or short and fast outings between work and family obligations.

Set-Up Details

I ride a size medium frame, with 120mm travel up front and 100mm in the rear. The wheels are 29” diameter, and since the bike is already so light (carbon frame and nice components), I like to run heavier tires so that I feel more confident on the trails. It makes for a fun combo – a zippy little bike with good grip. For gearing, I run a 32-tooth chainring up front with a 11-46 cassette, which gives me plenty of gear range for most climbs. Finally, I have a dropper post that gets the seat out of the way for riding downhill or across rough terrain.

We are expecting our second child in August, so I’m currently using this bike as my so called “gravel commuter” to continue to enjoy time in the woods. As with baby #1, my bike serves as a motivator for getting back in shape to enjoy all the fun trails in Bellingham.

Photos by Spencer Paxson.

Sarah would like to thank: @konabikes

Sarah Rheuban And The Canyon Spectral

Sarah Rheuban and the Canyon Spectra

I ride a Canyon Spectral AL 6.0. It’s pretty perfect for me. The geometry and setup is versatile and can handle everything from single track to chasing my crazy boys at the downhill park. The bike worked well for me right out of the box. I haven’t really done anything to it other than swap out the saddle for a Terry saddle. The bike can go anywhere I want it to go – it’s a jack of all trades. And it’s got a sweet blacked out paint job. It’s like my little black dress, if I could wear my little black dress in the mud. I love it!

Sarah and family
At the bike park with the kids

Sarah and her family run Prevelo Bikes. Please visit their website. You can also follow Prevelo Bikes through Instagram @prevelobikes.

Ginger Rosenbauer And The Trailcraft Cycles Big Mesa, Trailcraft Cycles Maxwell 26 Plus

Ginger and daughter of Trailcraft Cycles

The best thing about riding a bike is getting to be outside and enjoying time with people I love most. The bikes I ride and enjoy the most are the Trailcraft Cycles Big Mesa and new Trailcraft Cycles Maxwell 26 Plus. The Big Mesa is a hard tail its light and with its 1x 28T on the front and 11-42 on the rear this allows me to tackle most the mountains around here in Colorado. Mostly I just try to keep up with our kids that are getting faster and faster every year!

Trailcraft Cycles Big Mesa

I enjoy the versatility of the Big Mesa which can be ridden with 27.5 or 26 Plus tires. I prefer the 26 Plus wheels for the extra stability and traction they provide cornering on the loose granite or dry blown out trails that happen end of season. I’m not an expert rider and the bigger tires give me more confidence on the trails.

Trailcraft Cycles Maxwell 26 Plus

Th Maxwell 26 Plus full suspension is awesome and a lot of fun to ride – it’s going to be my new Moab bike for sure! I ride this bike in a size small and love the Maxxis DHF and DHL tires for extra grip, MRP Ribbon 140mm fork and it has a Fox Transfer dropper. Its super sweet and very plush to ride.

Best wishes for a fun Mothers Day and Happy Trails Ladies!

Ginger and kids riding mountain bikes in the desert
Summer bike ride

Ginger and her family run Trailcraft Cycles. I thought she’d be riding a different brand of bike because we’ve done reviews for the Maxwell line. When I saw her on one of her bikes for this post, I needed a little more detail. Ginger said she is 5’4″ tall and added “Our small size Big Mesa and growing Maxwell line fits riders up to 5’6” so it’s a perfect bike for growing teens and Moms”. Please follow Trailcraft Cycles through Instagram @trailcraftcycles.

Traci Thompson And The Yeti SB100

MTB mom and kids model the Yeti SB100

Mountain biking has allowed my family to go to spectacular places over the last several years. From red rock deserts of the American southwest to the loam of the BC, we have been able to ride together a lot as the kids have been growing up.

Yeti SB100

I like the Yeti SB100 because its climbing ability isn’t compromised by its suspension set up. That being said, it’s still a capable bike on mildly aggressive downhill terrain. This 29 inch wheeled mountain bike allows me to ride how I want. I enjoy undulating desert single track and challenging climbs. Certainly, this bike’s carbon frame and 1x GX Eagle drive train fit my style very well. If you were to place this bike on a spectrum ranging from hard tail XC racer to all-mountain thriller, it would definitely lean towards the latter. However, if the terrain gets a bit technical, the dropper post lets me easily put my weight over the rear of the bike.

The stock Maxxis DHF tire on the front is a little more burly than XC rubber, so it helps maintain traction and steering control on loose trails. For a full-suspension bike, I think the weight is reasonable. The medium sized 2019 Yeti SB100 weighs in at 29lbs with pedals and a water bottle cage.

Traci mountain biking with the Yeti SB100
Rolling in on the Yeti SB100

Traci’s family runs the Mountain Biking With Kids website. She would like everyone to get out on bikes with their families and support your local trail organization through dig days and/or financial contributions.

LittleBig Bike Review

label
LittleBig Bike Review - Featured Image

LittleBig Bike Review- Long gone are the days of starting your child off with a tricycle or some other single-use bicycle. Now, they need to begin working on their balance and their riding skills with a bicycle that will grow with them. This is where the LittleBig Bike comes into play.

This bike starts out as a simple balance bike – no training wheels needed. And then, as your child matures and is able to handle a bike with more advanced features – you can add the drivetrain. We had three different sized riders with different abilities get on the bike and take it for a spin.

Designed For Kids Aged Two to Seven

In the past, kids started out with the aforementioned tricycles and then progressed to small two-wheeled bikes with stabilizers or training wheels on them. As their balance got better, those training wheels were raised up slightly, and then more so, until they could be taken off. Thanks to the LittleBig Bike, these introductory stages are skipped over. Kids learn to balance on two wheels right away.

Mom and dad look on...

What Comes With The Bike

The bike comes with all the tools you will need to assemble the bike and convert it from a balance bike to a pedal bike. There is a wrench for the rear bolt-on axle and properly sized hex keys. When in its balance bike configuration, a plastic dust cover can be placed over the rear chain ring.

It’s Not Just A Kids’ Bike – It’s A Transformer!

These helpful videos were created by LittleBig Bikes. They take you though the assembly of the bike and how to go through its configurations.

Little Balance Bike

Big Balance Bike

Adding The Pedals

The First Stage – The Little Balance Bike

The LittleBig Bike comes already set up for kids ages two and three. This is the balance bike stage. There are no pedals and there are no stabilizers either. Instead, your child uses their feet, which should be flat on the ground when they are in the bicycle’s seat, in order to propel themselves forward. While it’s common for kids of this age to use their feet as the brakes, which works just fine, because they won’t be able to move at a high rate of speed, the LittleBig Balance Bike actually comes with front and rear hand brakes. The creator of the bike, the LittleBig Company, believes that kids this age can learn to use hand brakes fairly easily. And, it’s true! One of our test riders had never used hand brakes before. With a little instruction from his dad, the little ripper was braking safely and evenly.

Comfy on a descent while riding the LittleBig Bike
Powering along the dirt on the LittleBig Balance Bike
So much fashion and function with the LittleBig Bike

The Second Stage – The Big Balance Bike

Once your child gets taller, it’s time for the second stage of the bike. This is also a balance bike stage, but it’s set up for slightly older kids, usually those age four and five. The back section of the frame is one of the ingenious ways in which the bike grows with your child. All that you need to do is flip that back part of the frame and move the seat to the (new) top section. This provides more vertical height and pushes the seat back slightly so that there’s a longer reach for the handlebars.

The Third Stage – The Big Pedal Bike

Finally, when your child is ready for something even more advanced, pedals, the bike easily converts to accommodate them. There’s a separate pedal and crank assembly that can be attached to the bike. You don’t even need to break the chain! Since the hand brakes are already included, you just have to add this one section and then your child has a mini mountain bike that they can use to cruise along the trails.

Standing up on the pedals with the LittleBig Pedal Bike
Posing with the LittleBig Bike in pedal bike configuration
Simon Evans - Founder of LittleBig Bikes

Simon Evans – Engineer, Inventor, And Founder Of Little Big Bikes

Simon was kind enough to spend a few minutes on the phone with us and talk about his invention. When asked about the inception of what lead to the LittleBig Bike, he said:

“I used to work in a bike shop and I remember one day very specifically. On our sales floor there was a balance bike, then a 14-inch bike, and a 16, and an 18, and a 20. And they were all lined up. I thought, ‘Why do you have to buy all these different bikes?’ Why couldn’t you just have one bike that adapts?

This was the ‘light bulb’ moment that went off in my head. I knew what I had to do. I didn’t know exactly how I was going to do it, but I knew what I wanted to do.”

Specifications And Features

Because the LittleBig Bike changes sizes with your child, there are three different sets of specs for it. Firstly, the minimum saddle height for  stage one is 14 inches. Secondly, the minimum saddle height for stage two is 18 inches.  Finally, the minimum seat hight for stage 3 is 19.5 inches.

The maximum saddle height is at 18 inches in stage one, and then 22 inches for stages two and three. Another important measurement is the wheelbase. It’s at 27.5 inches in stage one. Stages two and three are the same here – 26.8 inches.

Wheels on the bike are sized at 14″ and the bike weighs 11.25lbs as a balance bike and 14.55lbs set-up as a pedal bike.

LittleBig Bike Size Chart

Little Balance BikeBig Balance BikeBig Pedal Bike
Min Saddle Height (inches)141819.5 (or 18" with optional short seatpost fitted)
Max Saddle Height (inches)182222
Top Tube Length (inches)13.515.515.5
Head Angle (degrees)667070
Seat Angle (degrees)787070
Wheelbase (inches)27.526.826.8

The LittleBig Bike is available with or without the additional pedal and crank attachment. You can also buy that attachment separately. You also have your choice of bright colors, including flame red, apple green, electric blue, and sparkle pink. The company even sells helmets on their website to match (or not match) your kid’s next bike.

Lovingly designed and hand-assembled in Ireland, the LittleBig Bike company does their part to ensure your young riders get off on the right foot when they become a part of your #mtbfamily.

Quick release seat collar for the LittleBig Bike

The bike features a quick-release seat collar.

This is where the drive train is secured on the LittleBig Bike

The pedals are fastened to the seat tube with these 2 bolts

Hand brake for LittleBig Bike

Front and rear hand brakes.

LittleBig Bike Review - adjustable frame

The front/rear portion of the frame is fastened here.

Getting Around On The LittleBig Bike

All our riders enjoyed the bike because it put them in control right from the start. Each mode of the bike was suited to each riders’ abilities.

We did our best to get one young lad to pedal on his own for the first time, but the pedaling was just not happening during this show-and-go impromptu session. There is absolutely no pressure with this bike though! We just converted it back to a balance bike and the young ‘un enjoyed riding the bike up and down the sidewalk.

Almost the first time pedaling solo on the LittleBig Bike

Your Child Could Use A Bike That Can Actually Grow Along With Them

If you want to pass your love of mountain biking on to your children, then do your best to start them off at an early age. The LittleBig Bike is an excellent option for learning the initial skill-set that a child will build on for years to come. You won’t have to worry about buying a new bicycle every year since this one will grow along with them. Above all, these bikes are designed to last. When your children outgrow the Big Pedal bike, you can easily resell it or hand it off to another young rider.

Obviously, when WIRED labels your invention as “genius”, you’re in pretty good shape. Ireland’s Simon Evans has come up with a kid’s bike that that is superbly functional, and good looking. Certainly, it would make Artemis Fowl green with envy. The design of the bike allows it to be enjoyed for multiple years by the same rider who will grow several inches. At any rate, as parents of a growing pre-teen and high schooler we hope Mr. Evans’ next endeavor will be applying his learnings to larger bikes.

Best kids mountain bikes

Kids’ Mountain Bikes
Start at this page to find the best mountain bikes for kids for two year olds through teenagers

Whistler's Lord Of The Squirrels

Go On A Family Bike Ride
What’s on your bucket list for family mountain bike rides? How about Whistler’s Lord Of The Squirrels?

Real cost bike calculator

Have A Good Laugh – Or Cry
Find out how much that mountain bike really cost you with our mountain bike real cost calculator

Little Rider Co Jersey Review

label
Little Rider Co jersey review

Little Rider Co Jersey Review – Mountain bikers of all ages wear long-sleeved jerseys in order to protect their arms and upper bodies while on the trails. That way, in case of a fall, they don’t end up with severe road rash. The jersey provides some sun coverage as well, helping prevent sunburn. With that said, it’s important that the jersey be lightweight enough to be comfortable and easy to movie in. The Little Rider Co. ‘Classic’ Jersey fits the bill quite nicely.

A Great Jersey for Young Mountain Bikers And BMX Kids

The Little Rider Co. ‘Classic’ Jersey in Stealth is dark gray with black markings and a white logo. It’s designed for very young mountain bikers and comes in sizes two through five. The jersey is machine washable (a must, since it’s made for performance) since it’s made of lightweight polyester. It must be hung or laid flat to dry. One of the best things about it is the fact that it provides full coverage. The long sleeves and high neckline provide plenty of protection while allowing the rider to comfortably wear a helmet. Our review is centered on an item from the ‘Classic’ series. Little Rider Co also offers a ‘Balance’ series and a ‘Signature’ series. Be sure to check them all out.

Little Rider Co MTB jersey for kids
Life Behind Bars graphic - Little Rider Co jersey

This Is Good Stuff

The jerseys are not flimsy or hastily constructed. My wife and I have owned mtb jerseys that are outdone by the quality of the Little Rider Co. kids’ jerseys. Just by running the fabric through my forefinger and thumb, I could tell that this falls into the category of Quality Goods. Firstly, the stitching on the inside of the jerseys is even and smooth. Secondly, the dye-sublimation for the graphics is sharp and bright. Thirdly, the elasti-cuff sleeves will help keep the cuffs in place on the rider’s wrists. Finally, the color range for this jersey is shown below.

Little Rider Co, Classic jersey colors

Model Time!

We had the opportunity to run into fellow #mtbfamily @pedaladventures in St. George recently. Their youngest son was taking a break from international traveling but was still for up slipping on one of these sweet looking jerseys. Now, you wish there was a Big Rider Co, right?

Little Rider Co - jersey model
Little Rider Co Jersey Review - St. George
Little Rider MTB jersey review - wood feature
Little Rider Co sleeve detail

Little Rider Co Size Guide

Little Rider Co jersey size guide

Click the size chart to enlarge it

About The Little Rider Company

The Little Rider Company is a UK-based business that specializes in mountain biking products for kids between the ages of one and five. They were founded due to the lack of equipment available for children in that age range. Specifically, the ones who want to ride their mountain bikes alongside their parents or older siblings. They make jerseys, like the ‘Classic’ one reviewed here, as well as helmet bags, balance bike accessories, and other clothing.

Surprisingly, as this endeavor is rather new, your little one may be a candidate for the company’s Little Rider Co Army. Take a look at their site and read the ‘Little Rider Army’ page to see if your womp rat is up for the job.

Will Little Rider Co ship to your corner of the world? Chances are pretty good. As per their website: We aim to ship to ALL international locations. Shipping times will vary depending on location. We will aim to package and ship your order within 1-3 days.

Best kids mountain bikes

Kids’ Mountain Bikes
Start at this page to find the best mountain bikes for kids for two year olds through teenagers

Whistler's Lord Of The Squirrels

Go On A Family Bike Ride
What’s on your bucket list for family mountain bike rides? How about Whistler’s Lord Of The Squirrels?

Real cost bike calculator

Have A Good Laugh – Or Cry
Find out how much that mountain bike really cost you with our mountain bike real cost calculator

Marin Hawk Hill Jr. Review

label
Marin Hawk Hill Jr Review
Marin Hawk Hill Jr Review

The Marin Hawk Hill Jr mountain bike is a smaller version of the Hawk Hill. The Jr version features geometry made smaller and more proportionate for kids. The stand over height is about 24.5 inches. Tp emphasize, if you’ve been looking for a mountain bike for your young rider, one that shows just how serious he or she can be on trails – then the Marin Hawk Hill Jr is a great option.

Don’t Take Our Word For It – Take This Kid’s

12 year old YouTuber OneMTB gives you an in-depth look at the Marin Hawk Hill Jr.

The Marin Hawk Hill Jr Is Designed For a Smooth Ride

This Hawk Hill Jr is designed for the trails, thanks to its suspension system. Firstly, in the front, there’s the X-Fusion 120mm-travel fork. Secondly, the back features an X-Fusion O2 Pro R shock. Thirdly, there’s  Marin’s MultiTrac suspension platform that’s designed to cushion bumps while riding. Finally, the tires are 24 x 2.25″ Vee wire. All in all, the Hawk Hill Jr. give you a fun, flowy ride.

Built For Young Mountain Bikers

The bike features a Series 3 6061 aluminum frame. The handlebars are made in Marin Mini-Riser style, with a 15mm rise. Those same handlebars consist of 6061 double-butted aluminum, which is both strong and light. The Hawk Hill Jr comes with a Deore 1×10 drivetrain, a Marin forged alloy 1×10 hollow spindle crankset and nylon pedals. The bike comes with 24-inch wheels, but it you can also run mom’s or dad’s old 26-inch rims in this sled.

A Sleek Looking Kids Mountain Bike

The front and rear brakes are both Shimano BR-M315 Hydraulic Disc brakes, with the front rotor measuring at 180mm and the back 160mm. The Hawk Hill Jr comes in two color combinations – charcoal and purple and charcoal and cyan, and it has an overall sleek look. If you add a dropper post, it can be internally routed.
Best kids mountain bikes

Kids’ Mountain Bikes
Start at this page to find the best mountain bikes for kids for two year olds through teenagers

Whistler's Lord Of The Squirrels

Go On A Family Bike Ride
What’s on your bucket list for family mountain bike rides? How about Whistler’s Lord Of The Squirrels?

Real cost bike calculator

Have A Good Laugh – Or Cry
Find out how much that mountain bike really cost you with our mountain bike real cost calculator

Pivot Mach 6 Carbon Review

label
Pivot Mach 6 Carbon Bike Review

PIVOT MACH 6 CARBON REVIEW

A Progression Of Perspective

The evolution of the trail bike over the last few years has taken some dramatic leaps via engineering, the ease of prototyping and materials. Several manufactures have adopted a pragmatic philosophy geared towards producing the ideal mountain bike. The Mach 6 Carbon is Pivot’s latest species in the family of full-suspension quiver killers.

Pivot Mach 6 carbon and rider
  • Large Pivot Mach 6 Carbon with Pro XT/XTR build
  • 27.5 inch wheels
  • 6.1 inches full-suspension front and rear
  • Our demo weighed in at an even 30lbs without pedals and with a plastic water bottle cage attached to the down tube
  • Enduro, All-Mountain, Medium Travel Trail Bike
  • 15 year old Utah boy
  • 5ft 10.5 in tall
  • 140 lbs with gear
  • 3.5 cumulative high school GPA
  • Enjoys enduro races, rides bike parks as well as NICA and the dirt jumps
  • Will work for cold hard cash, sushi, Hawaiian shirts and/or bucket hats.

VISIT PIVOT CYCLES: Website | Instagram | Facebook

Sizing And Specifications For The Pivot Mach 6 Carbon

Pivot Mach 6 Geometry Chart

Click on the Pivot Mach 6 geometry chart to enlarge it.

Mach 6 Carbon Frame SizeRider Height RangeStand Over Height
Extra Small4’11" – 5’4”27.9"
Small5’3" – 5’6”28.0"
Medium5’6” – 5’11”28.8"
Large5’10” – 6’3”29.0"
Extra Large6’2” +29.0"

At A Glance Geometry

The modern geometry on this bike checks all the boxes for performance and efficiency. The wheelbase on our large measures 45.43 inches. A chain stay length of 16.95 inches is common across all sizes from XS – XL and the large frame sports a 66.25º head tube angle. Each size also has a 13.6 inch bottom bracket height.

The Frame

The foundation of this bike is its full carbon frame with state-of-the art materials and proprietary molding technology. The Pivot Mach 6 double-wishbone rear triangle design with Boost spacing is borne from mechanics originating from downhill bikes. Why does this matter? The result is a stiff frame which is energy-efficient, responsive and capable of hosting wider tires. These assets carry over to the real world when when pedaling uphill as well as making split-second decisions on technical descents. A front derailleur can be added to the bike. The internal cable routing is attractive and the frame is compatible with internally routed dropper posts. Best of all, a DW-Link® suspension design complements the frame’s temperament like peanut butter and jelly; like Eddie Masters and L-O-Ls.

An Expert Has His Say

To get a bit more detailed, we spoke with Pivot Ambassador and Go-Ride rep Kris “Krispy” Baughman. He told us, “Due to the design of the DW links and the way they fit together, it not only creates a smooth ride, it makes the bike very easy to maintain.

“The DW-Link suspension on the Pivot Mach 6 Carbon is super plush and pedals extremely well. The suspension handles rocky and sharp terrain due to the system’s traction and flat-prevention characteristics.”

Wheel Set And Tires

The Pivot Mach 6 Carbon comes with a DT Swiss wheel set. The 30 spoke aluminum M1700s are a solid option for this sled because of their durability and weight. The hoops are laced to DT 350 centerlock hubs and straight-pull spokes. Numbers for the front hub are 15×100/110mm and rear hub measures in at 12×142/148mm. Maxxis tires on our demo were of the Minion DHR II (rear) and Minion DHF (front) flavor.

DT Swiss M1700 wheel set
DT Swiss hub
Maxxis tire detail

Pivot Mach 6 Carbon Cockpit – Drivetrain, Bars, Brakes, Saddle, Dropper

Our demo was the Pro XT/XTR build and it featured the nifty 1×12 11-speed transmission with 11-46 range cassette. A 30t front chain ring mounted to a 175mm Race Face Aeffect crankset transferred power from the pedals to the ground.

Shifting the bike was managed via Shimano XT M8000 11-Speed levers and silky smooth Shimano XTR GS 11-Speed rear mech. A pair of smartly designed and comfortable pair of Phoenix Team Padloc grips adorned the 815mm wide carbon bars.

Shimano XT M-8000 brakes help slow and stop the bike along with the system’s center lock rotors. The 125mm Fox Transfer dropper post made the Phoenix WTB Pro Vigo saddle fall and rise.

Pivot Mach 6 Carbon Suspension Run-Down

The Fox suspension on the bike features a Fox Factory 36 27.5″, 44mm offset, FIT4 – 160mm fork and Fox Factory Float DPX2 shock. Front and rear travel for the bike are both spec’d at 6.1 inches (155mm). Pivot has even added a dandy of a feature called the ‘Pivot Sag Indicator’ to the rear shock. The goal of this little endeavor is to assist you with tuning the rear shock to your weight.

Pivot Mach 6 Fox 36 fork

Fox 36 Fork

The Fox 36 Fork on the Pivot Mach 6 Carbon offers 6.1 inches of Kashima coated travel. Tune it correctly for a plush, responsive ride.

Pivot Mach 6 Fox shock

Fox Factory Float DPX2 Shock

We kept a shock pump handy to get this thing dialed. It worked as good as it looks and it provided great traction while climbing.

Pivot Mach 6 linkage detail

DW-Link® Suspension Design

We learned that DW designs its linkage specifically for Pivot’s catalog of bikes. The result provides for an efficient, versatile riding experience.

Pivot Mach 6 rear shock sag setting adjuster

Pivot Sag Indicator

This is a really clever way of fine-tuning the sag on the rear shock. Bernard Kerr takes you through how to do it in this D-I-Y video.

Riding The Pivot Mach 6 Carbon – An Advanced Mountain Bike For Advanced Riders

You can certainly take this bike on your local single-track XC loops and have a great time, but it’s designed for so much more. Wyatt, our test rider for this bike, is a 15 year-old mountain biker who enjoys getting on technical terrain as much as racking up the miles. He said, “The Pivot Mach 6 Carbon didn’t limit what I wanted to do. It was comfortable to pedal and I really noticed how the suspension and frame worked together on the rocks.”

All-Mountain Riding On The Pivot Mach 6

Our first outing on the bike was to St. George, Utah where we rode the 6 mile long Barrel Roll trail. This trail undulates with a max elevation gain of about 300 feet and features expert rated technical climbs and descents. It was the perfect initial testing ground because the Mach 6 began to showcase its versatility right from the trail head. Turtle Wall and Paradise Rim were also on the itinerary.
Climbing Barrel Roll trail, Pivot Mach 6 carbon
Pivot Mach 6 carbon review - Barrel Roll trail
The carbon frame, DW-Link suspension, and dropper post all work together to make cranking uphill a pleasant chore. Wyatt was able to move the bike through all 3 axes of rotation in order to attack a series of ascending rock steps, narrow corridor, or hairpin turn on the trail. Descending the trail on this bike was simply free money; because again, the bike’s geometry and suspension worked in concert.
Kid mountain biker
The Pivot Mach 6 provides a balanced ride
Pivot Mach 6 carbon bike review - mtb kid

The Pivot Mach 6 On It’s Home Turf

We dialed things up a notch and rode some more advanced terrain in Sedona. Even if you’re a capable rider, the bike will continue to inspire calm and cool confidence. The Pivot Mach 6 Carbon partnered with the Hiline Trail like a margarita and your favorite molé. Getting to the downhill section of Hiline requires a bit of work via technical ascending and the bike did not hold our rider back at all. Wyatt was able to onsight Hiline’s descents and leave me in the dust. I’d love to share some photos of this ride with you, but really – the kid got in a state of flow and simply could not stop.
Climbing the Hiline trail - Pivot Mach 6 carbon

Downhill Trails With The Pivot Mach 6 Carbon

After chalking up some aggressive trail riding, it was time to hit full-on downhill terrain with the Mach 6. During the winter months, our favorite local trails are covered in feet of snow so we had to continue our travels in order to see if we could break this bike. Nevada’s Bootleg Canyon Mountain Bike Park is a great zone to see how durable your bike really is. In our experiences at Bootleg, we have had to replace wheels, derailleurs, and tires because of the area’s hard, sharp rocks. And this is just on the intermediate trails.
The Pivot Mach 6 looks great standing still, too
Pivot Mach 6 mountain bike review
Consider the Pivot Mach 6 carbon for your rippin' mtb teen
Following a warm-up run, we shuttled to the top of Snakeback and let loose. The Mach 6 carbon once more flaunted its functionality. The overall configuration of the bike was again happy to strike off-camber, sharp rocks at speed. The Mach 6 scrambled over abrupt technical terrain as surefooted as the canyon’s bighorn sheep. The Maxxis tires performed admirably on loose gravel in the turns on the bike park’s dual slalom course.

Getting This Bike In The Air

Wyatt said, “Getting the bike in the air is a lot of fun. Again, the suspension allows you to make small mistakes without big consequences.” Is it really cliché if it’s true? The bike IS flickable. The bike IS playful.
Jumping with the Pivot Mach 6
Rampage site jump on the Pivot Mach 6
Step-up jump on the Pivot Mach 6
Gap jump on the Pivot Mach 6 carbon

Summing Up The Pivot Mach 6 Carbon

After carefully selecting the design and engineering characteristics that have made other bikes in the Pivot catalog successful, the company has evolved the Mach 6 carbon into lively and witty bike.

There’s just no other way to say it. Whether you’re churning out the watts to get to the top of the next hill or bombing down technical terrain – the Mach 6 carbon yearns to help you build and release the kinetic energy that makes this sport so rewarding and fun.

The Pivot techies are just as concerned about the ride up the mountain as the ride down and it’s all on display with this bike. Furthermore, we’re convinced that Pivot Cycles is nothing less than a team of number crunchers who like to get loose. And because they have families of their own, they even went the extra mile to create a size range of bikes that most other manufacturers do not match. This allows your entire family to enjoy higher, longer and faster rides together on premium mountain bikes.

Best kids mountain bikes

Kids’ Mountain Bikes
Start at this page to find the best mountain bikes for kids for two year olds through teenagers

Whistler's Lord Of The Squirrels

Go On A Family Bike Ride
What’s on your bucket list for family mountain bike rides? How about Whistler’s Lord Of The Squirrels?

Real cost bike calculator

Have A Good Laugh – Or Cry
Find out how much that mountain bike really cost you with our mountain bike real cost calculator

Easter Gift Ideas for Mountain Biking Kids

label
Easter gifts for mtb kids
Easter gifts for mtb kids

Easter Gifts for Mountain Biking Kids- Easter is right around the corner! If you do an Easter basket or an egg hunt for your kids, why not include some MTB goodies?

Our kids look forward to our Easter egg hunt tradition. Since these kids insist on continuing to grow, we need to buy them some new MTB clothing for spring/summer anyway. Therefore, we often include these items in the Easter egg hunt to make it more fun.Not surprisingly, our kids are way more stoked to find new MTB gloves in an egg than they would have been had we just handed them to them before our next ride.

Here are some ideas for your upcoming spring event!

osprey kids mtb hydration pack

Osprey Moki Kids’ Hydration Pack

Instead of a basket, your kiddo can collect Easter goodies in a useful hydration pack! The Osprey Moki is a great choice for your little one. With just enough space for a 1.5L hydration bladder, a few extra snacks, and an extra layer of clothing, the Moki works great for short bike rides or hikes with the family. Finally, your little ride can carry their own MTB supplies!

Buy this kids’ hydration pack from:

Easter gift for mtb kids 2019 shuffle youth led mips

Specialized Shuffle Youth LED MIPS Helmet

Every mountain biker loves a new lid! The Specialized Shuffle Youth LED MIPS Helmet is a child sized helmet that includes a magnetic buckle for easy fastening. Additionally, the integrated LED tail light will increase your child’s visibility for evening or morning riding. Most important, this helmet features MIPS, or Multi-Directional Impact Protection System, which helps to reduce the energy from certain impacts to better protect your child’s head.

Buy this kids’ mountain bike helmet from:

Easter gift 2019 kids mountain bike shoes

Five Ten Freerider VCS mountain bike shoes

The Five Ten Freerider VCS mountain bike shoes are made with Stealth Marathon rubber. Basically, this will help your little ripper’s feet to stick to platform pedals. Also, the colorful suede and synthetic mesh uppers breathe well. They come in bright colors, too! All in all, your kiddo will love these shoes! Check out our Five Ten Review.

Buy these kids’ mountain bike shoes from:

Easter 2019 gift kids dakine mountain bike jersey

Dakine Prodigy S/S Jersey

Set out on that spring ride in style!  The Dakine Prodigy S/S Jersey is a made with the same quick-drying, odor-fighting, stretchy material as the adult ones. This is a raglan-sleeved concert tee for the trails and a uniform for getting rad.

Buy this kids’ mountain bike jersey from:

Easter gift 2019 kids mountain bike gloves

Troy Lee Designs Air Gloves – Youth

Gloves are perfect Easter gifts for mountain biking kids. The Troy Lee Designs Air Glove is a well ventilated and lightweight glove designed to provide superior protection and comfort. Specifically, they are meticulously tested with acute attention to detail and a fearless sense of style. Perhaps most important, they come in a vast color selection!  Your young rider will be hitting the trails in style.

Buy these kids’ mountain bike gloves from:

Easter 2019 gift kids mountain bike knee pads

G-Form Pro-X2 Knee Pads – Youth

From after school trail rides to cruises around the neighborhood, the G-Form Pro-X2 Knee Pad keeps your kids protected on the bike without any unnecessary weight or bulk. These lightweight and flexible pads are body-mapped for a comfortable fit. However, they are specially designed to harden upon impact. to this end, they will absorb the energy of unexpected spills and tumbles.

Buy these kids’ mountain bike knee pads from:

timber bell Easter gift for mountain biking kids

TIMBER Quick-Release Mountain Bike Bell

Keep an ear on your little rider with a TIMBER Quick-Release Mountain Bike Bell. This bell provides awareness when you need it, silence when you don’t. The simple on/off lever controls the internal clapper. In addition, the timber bell can be easily mounted anywhere on your handlebars for instant shifting between ring and silent mode. Compared to other bells, the ring of this bell is downright pleasant.

Buy this kids’ mountain bike bell from:

Easter gift 2019 kids mountain bike shorts

DaKine Kids Pace Shorts

Stretchy and adjustable, the DaKine Kids Pace Shorts won’t just inspire your kids to get out and ride.  They’ll have ’em looking like the prodigies that they are destined to be. Firstly, these shorts are designed to fit with and adjustable waist. Second, they are durable, Finally, they look legit! Besides, kids love wearing mountain bike specific clothing.

Buy these kids’ mountain bike shorts from:

Easter 2019 vivofit jr kids activity tracker gift

Garmin VivoFit Jr activity tracker

Garmin created the VivoFit Jr. for young kids seeking an activity tracker. The VivoFit Jr. doubles as a stylish watch with fun-loving graphics. Featuring a built-in accelerometer, the VivoFit Jr. tracks steps taken throughout the day, as well as sleep throughout the night. It’s fully waterproof, so you won’t have to worry about ruining it from submersion in the bath or neighborhood pool. Another cool feature is the replaceable battery, which lasts up to a year of use and doesn’t require constant re-charging. You kids will love this gift!

Buy this kids’ activity tracker from:

Aaron Gwin Is Race Ready For 2019

label
Aaron Gwin Interview 2019 - featured image

If you have a kid around the age of three, chances are good they are going to start their cycling history similar to how Aaron Gwin started his. Perhaps a hand-me-down bike from a family member or neighbor will spark a lifetime of experiences enjoyed on two wheels. For those of you not familiar with Aaron, he is America’s best professional downhill mountain bike racer. A thumb injury limited his performance last year, but he’s healthy now and ready to go full-throttle.

When we attended the last round of racing this year at Bootleg Canyon, Aaron was kind enough to answer our questions about his progression from BMX, to motocross, to mountain biking; his dedication and discipline, what he puts in his oatmeal, and that sweet Intense M29 he’s on this season. Thanks for your time Aaron, and good luck this year!

Aaron Gwin Interview 2019 - featured image

Photo by Brett Thompson

MTBK: When you were younger how did you get into riding bikes?

Aaron: Wow. That’s a while back. It started when I was three, I think. My parents got me my first bicycle. My baby-sitter at the time had a bike for her son that was a little older than me and my mom bought it, repainted it and gave it to me for Christmas one year. It was a full-on department store tiny little kid’s bike. We have photos of me riding it still. It had the full red solid wheels. There were no spokes and it was pretty funny. So, that was my first bike. I never had training wheels. My mom just took me out in the park in the grass and started pushing me around until I figured it out.

When I was four, we got a bike – I think it was an Elf. I don’t know if you remember those back in the day, they were these BMX bikes. There was a company called Elf Bicycles. No, I think Elf was the bike after that. I had Dyno before that, it was a Chrome Dyno.

We used to go to the park all the time to just burn off energy because I had a lot of energy as a kid. There was a BMX track right next to the park that we used to go to and I’d watch guys ride. I got all fired up on it. So, my parents got me a track bike then we started going to the track I think right when I turned four. And that’s kind of where it started. My whole life feels like it’s a timeline of racing because I’ve been racing since basically I was four or five so I remember everything based on the races we were doing at that age.

MTBK: Did your parents play a big role in supporting you during the early days?

Aaron: Yeah, for sure. They were 100% supportive from the beginning. It started out as a fun thing. It’s always been fun but we definitely started traveling a bit more. By the time I was six, we were doing some nationals. And by the time I was eight, we were racing BMX all over the country. We were flying around to the nationals and doing all that. Then I moved on to motocross when I was 12. Then I got into downhill right before I turned 20. But until I was 17 or 18 and moved out of the house, my parents were the ones driving me to the races and doing everything. It was a family thing – the three of us for a long time. It was cool.

MTBK: Kids dream of getting their first sponsorship – you got yours when you were eight?

Aaron: Yeah, it was a trip. It wasn’t really anything we set out to do sponsorship wise. BMX is not cheap but it’s not super expensive like motocross or some other sports. It’s really just the travel fees but we started picking up sponsorships. I remember I was sponsored by Vans when I was eight. And I got a free pair of shoes and I thought that was the coolest thing ever because I liked Vans shoes. So, I didn’t really care about bike parts and stuff that was more for my dad but I was pumped on the free shoes.

MTBK: Tell me more about your BMX racing.

Aaron: I think it all just happened pretty naturally. We raced a lot and it just seemed like every year we started racing more and more. Then we were battling for championships and doing all that stuff and it got pretty serious. I think by the time I was about almost nine, I stopped racing. I loved riding my bike. But after all the traveling and all the racing, I just wanted to be a normal kid and hang out with my friends and play baseball and do some other stuff. So, I never stopped riding but I stopped racing when I was eight or nine for a couple of years until I got into motocross. When I was younger, I always wanted to race motocross.

MTBK: How did the transition go from BMX to motocross? That’s a pretty big leap if your family is not already in to motorcycles.

Aaron: For sure. That’s probably why I got into BMX because I wanted to race dirt bikes. My dad was like, “Let’s get you a bike and start there.” And so, I remember asking for a long time. Finally when I was 12, he got me a Kawasaki 80 and we started riding that thing.

So, it was a big step. I remember it being a big deal for him because I had wanted one forever and he’s a physical therapist and my mom’s a nurse – so they see all the injuries and stuff. They weren’t too pumped on it, especially my dad. Finally we broke him down and he got me one. But it took a little while. And then we were kind of full-on with racing dirt bikes for about five or six years and trying to go pro doing that. So, that ended up being the same thing. We went to a lot of nationals and we were riding a lot till I was about 17.

MTBK: What drew you to motocross?

Aaron: I think it just always looked really fun. I would watch the races when I was a kid. And then I had a couple of neighbors that had dirt bikes and I just always thought that they looked super fun. It was kind of like a bicycle that you didn’t have to pedal in my eyes so I liked it.

MTBK: How’s the thumb?

Aaron: The thumb’s good. It’s been a bit of a long process. It was one of those weird injuries where it felt fine to ride for maybe three, four months now – but it’s still a little bit sore. I don’t notice it all when I ride. It’s just the joint and stuff, the ligaments are bit messed up. So, it’s just a slow healing process. Hopefully I won’t land right back on it in the next couple of months. But, it doesn’t bother me when I train or ride at all, so it’s all good.

MTBK: Are you going to be able to go full throttle?

Aaron: Yeah, for sure.

Aaron Gwin downhill race, Bootleg Canyon

Photo by Brett Thompson

MTBK: The DH field is stacked now more than it’s ever been. The younger fast kids are getting faster and it seems everyone is stronger now. With all these guys coming up, what are you looking for to most this year?

Aaron: I’m just looking forward to getting back at the races, being healthy, getting a new bike out and just getting comfortable – and then just seeing where we’re at. I didn’t get to race much last year. Really, I only raced one World Cup before I got hurt. Since I was injured and probably shouldn’t have been riding for most of them. And the other ones I had a very limited time on the bike – so it wasn’t really a fair shot for me. I’m looking forward to being back at the races 100%, getting time in on the new bike and getting everything dialed. I’m excited. There are a lot of guys going fast but I feel good. I’m sure by the time Fort William comes around, we’ll be fired up pretty good.

MTBK: Why do you race at Bootleg Canyon?

Aaron: For training and just fun. I’ve been coming out to this race in March every year for seven or eight years probably now and it’s good for me. It’s so different than what we race on the World Cups; the bike setup, everything is completely different. But there’s always guys here going fast. It’s a longer track, so it’s good to kind of see where your fitness is at and getting some good riding with my buddies. It’s just more of a fun race and a preparation race for me.

Aaron’s Sponsors

Intense Cycles
e-thirteen
Fox mtb suspension
HT
STG
TRP

MTBK: What can you attribute your discipline to as far as staying healthy, making good choices, staying fit

Aaron: For me, I’ve always been pretty self motivated. I’ve never really lacked the discipline to train and work hard and go after what I want. That’s kind of where I get a lot of the confidence with my racing. It’s in the work that I put in. I feel like my fitness is really the only thing that can hold me back. I feel like if the bike is set up well for me and I’m fit – nobody can beat me. That’s how I’ve always felt.

I feel my fitness is what holds me back the most. It’s pretty rare that I feel like people are just flat out going faster than me. And I think my preparation is what I work really hard at it because that’s what gives me the most confidence when I ride. I’ve just always been willing to put in the work. And as you get older and mature and more, you see the results of your hard work and you’re always learning and improving. I enjoy that process of just getting better and experimenting in the gym or whatever and trying to figure out ways to get stronger. Every year, it’s a constant search to try to get better and to also just try to keep things fresh and be motivated but it doesn’t seem to be too hard for me to stay motivated.

MTBK: You said your fitness is the only thing holding you back and so that leads into my next question, how do you mentally prepare for a race? Has it changed over the years or what do you do now?

Aaron: Nothing really changes mentally. I don’t do a lot to mentally prepare. I think my best mental preparation is just being physically prepared. If I feel physically prepared and I feel good on the bike then my mental game is strong. If I know that the bike’s not 100% working for me or if I’m maybe not where I want to be physically then that’s the place I focus on improving. The mental side is just, I’ve always been a racer and when it’s time to race, I can just get it done. I have the ability that when it counts, I can throw down a good solid run. I don’t ride over my head and I try to just be smart about how I approach my race weekends. So far it’s worked out pretty good for me.

MTBK: What are your current favorite healthy foods?

Aaron: There is stuff I eat every day. I wouldn’t say I’m on a diet but I just eat really clean and I try to get the right amounts of the right things at the right times. Pretty much have eggs and oatmeal every morning and I enjoy that. I have to put ham in my eggs. In my oatmeal I put a little bit of yogurt, berries and peanut butter. The yogurt changed the game on the oatmeal for me. It makes it so much easier to eat. It’s not all dry and gnarly. So, I look forward to that every day and then just healthy meals. I think as I’ve gotten older too, I’ve eaten clean. You develop more of a palette for really clean food whether it’s chicken or vegetables or potatoes or whatever. Now I enjoy eating that stuff.

MTBK: One of the things we like about this sport, is accessibility to the athletes. Are you cool with that stuff most the time?

Aaron: I really enjoy it. It was a bit of an adjustment early in my career because nobody ever knew who I was when I came in. And I came in under-the-radar and then started doing well. Once you have success, everybody loves you and then you have a couple of rough years and then you get some negative stuff. That was a little bit hard for me to take back in 2013 or whenever that was. But as you mature over the years and learn to just enjoy what you do and you make the decisions that you think are best and you’re okay with that.

I think as far as the fans go, it’s only fun. Everybody’s got their opinions and their favorite riders and whatever so that’s kind of what makes sports what they are. If everybody loved everybody, so to speak, you wouldn’t really have some of the rivalries, or the hype, or the tension.Now it’s cool and I’m blessed to have a lot of great fans. I get a lot of love from my supporters and it’s a trip for me to think back on now.

I remember showing up to this race 2008 and literally nobody here would have known who I was and now I show up and everybody knows who I am and everybody stops by and says, hello. It’s always a bit of a cool thing coming back to these local races. I remember where I started and where I’m at now. I’m just blessed to be where I’m at. I enjoy it a lot.

MTBK: Do you have any advice for parents with kids who like to race bikes?

Aaron: Everybody’s got to do what they believe is best. It is a sacrifice you make. If you’re going to spend time with your kid going to races, you’re giving up part of your life to do that. You’ve got to be able to make that choice up front so that you don’t feel like your kid owes you success. From my experience of watching the parents and riders we’ve worked with, you need to decide to support your kid at whatever level your kid is happy with. I think knowing that up front is good, then there are not any surprises or expectations. You can just give it your best shot. If it works out, great. And if it doesn’t, you have a great time as a family spending time together. I always had a great time with my parents.

Honestly, when I stopped racing motocross, we never thought I was going to make it. We put in all that work and travel and time and it looked like it wasn’t gonna happen for me – but we didn’t regret it. We got a lot of really fun time together as a family and we’re still really close. Then it ended up working out with downhill. But I think for parents there’s a lot of value.

I’m not a parent, so I can’t speak too far into it. But I think for me as a rider or as a coach, it’s just keeping the kid focused on the things they can control. It’s just learning, getting better at working on their weaknesses – not getting caught up in rivalries with other kids and whatever. It’s about trying to improve each weekend; enjoying what you’re doing and just getting better. That’s always been my goal and it still is now.

Bootleg Canyon MTB Park - Aaron Gwin

MTBK: Tell me about the bike you’re on this year.

Aaron: We’re on the M29 intense. It’s a full downhill bike. I’ve been on the bike a couple of months now since I signed my new contract. We’re kind of going back and forth between the large and the extra large because I’m a little bit between sizes. I think I’ll end up on the extra large for the World Cups and just testing through parts and all kinds of things. It’s been awesome and I’m really liking the bike so far. We’re just trying to get into the races a little bit this year and see where we’re at. I have the opportunity with Intense to sort of change things or do whatever I want but I really like the bike right now. We just want to get it to the races and get it through a season and see where it stacks up.

MTBK: Is this is a stock frame then?

Aaron: Yeah. Everything on this bike is Stock. We had some prototype links we were messing around with a few weeks ago, but I didn’t like them quite as much. I’m just on a full stock bike right now.

Aaron Gwin Intense M29 DH bike - rear brake detail
Aaron Gwin Intense M29 DH bike - all triple crowns

MTBK: Do you have to do things over and over before you know you want to change something?

Aaron: Kind of. It depends. We’re just trying to shorten the rear end a little bit instead of making a whole new carbon mold. We were messing with the links, but it changed the leverage ratio on the bike too much where it just wasn’t worth it. So, like I said, I’m a little bit between sizes but we’re back to stock now and it’s feeling good. I’ll probably just race the stock XL all year.

MTBK: Aside from Intense, who’s sponsoring this year’s campaign?

Aaron: We’ve got a lot of the same people that I’ve been with the last three years. With TRP, we got a full drive terrain breaks derailleur, shifter everything with them that we’ve just developed over the last couple of years, actually. It’s just now getting to be available to the public. Fox Suspension which has been with me my entire career. E13 wheels and cranks, they’ve been with me last three years and that’s been great. Then STG, Renthal, ODI, HT pedals, kind of everything I’ve had design input in and stuff like that. So, it’s great.

And then our new sponsor this year is Kenda Tires and that’s been exciting. We got some new tires in the works and I’m really liking the tires that we got so far. So, we’ve got a lot of big plans over probably the first half of this year to introduce a few more tires to their lineup. It’s a good group of supporters. And definitely we’re really happy to have everybody we’re working with.

Meet Hannah Finchamp – Pro Mountain Biker, NICA Alumna

label
Hannan Rae Finchamp - race start/finish

Hannah Finchamp is a professional mountain biker on the Clif Pro Team. She started her career as a triathlete competing in, and winning XTERRA world championships. Hannah was kind enough to answer all our questions about her training regimen, high school experience as a NICA athlete, and what’s coming up for this mountain biking season. Before you read on, we would like to sincerely thank Hannah for her time.

Hannan Rae Finchamp - race start/finish

Photo by Cano Fotosports

MTBK: You recently did the Mediterranean Epic with a top 10 finish – is that correct?

Hannah: Yeah, I was 9th this year.

MTBK: Was a top-ten finish one of your goals or did you meet your goal(s) for that race?

Hannah: I did meet my goals. I would say my goal for that race was more the experience than anything. In the past, being in college, I’ve never really done a solid pre-season event. And so this year, I said I just kind of want to see what I can do. And that’s kind of my mantra for the season. I was just like, “Let’s see what I can do.” I decided to go to Spain, do a pre-season race and kind of take each stage as a different gamble and discover the different things I can do.

MTBK: Were there athletes that you recognized from past events doing that race as well?

Hannah: There were but it was really cool. I travelled over there with Kaysee Armstrong, another American. We are competitors and friends so we could at least have each other there. And we were pretty much the only North American athletes. Everyone there were people that I’ve maybe raced against but mostly watched on Red Bull TV or something like that. I wanted to just see what I could do so I didn’t want to put all kinds of expectations in my head. I purposely didn’t look at the starter list or anything. When I started the first day I thought, “Whoa, this is a big event.”

MTBK: When did you start riding mountain bikes?

Hannah: My journey to mountain biking was a little bit different actually. I started racing triathlon when I was nine. In triathlon I did the XTERRA races, so I rode a mountain bike. Throughout that time for training I would do various mountain bike races. But it really wasn’t until NICA that I started doing mountain bike races without the swim and the run.

When I was 16, at the XTERRA World Championships, I won the event and a Clif Bar rep was standing at the finish line. The Clif team manager asked me if I would want to race for them and that was an opportunity I couldn’t turn down. A few years into my journey with Clif Bar they switched their focus entirely to mountain biking. With me being so young, they offered me the opportunity to make that switch with them. I did. And ever since, I’ve been a full time mountain biker.

Hannah Rae Finchamp - BC Bike Race, 2018

Photo by Todd Weselake

Keep Up With Hannah

Hannah writes and maintains a blog. She told us, “Every single time I start a race I write a post try and be as open as possible about it, so hopefully someone can relate to a thing or two on there”. Be sure to take a look at Hannah’s writing and follow her on Instagram.

MTBK: Do you miss the XTERRA races? Now that you’ve been able to tour the world in a different discipline, do you miss the swimming and the running?

Hannah: I miss it because it was a big part of my life and I do love the competition, but I don’t regret the decision I made in any capacity. I love mountain biking and it’s definitely what I was meant to do. I don’t plan on changing that anytime soon.

MTBK: How did you start your triathlon career? Did your parents play a role?

Hannah: I started as a soccer player and I felt as a young kid, “I never get tired on the field. I just want to run all day long.” And so, I asked to go to a running race and at that running race there was a booth at the race that was advertising a triathlon. I pointed to that booth and I said, “Mom, I want to race the triathlon.” She said, “Oh, they don’t have this for kids.” And the guy at the booth said, “Oh yes they do!” So, I went through a triathlon camp. I learned how to do it and then that was that.

MTBK: What’s the best thing about participating in high school mountain biking for you? What did you like the best?

Hannah: My favorite part of high school mountain biking was getting to race with kids my age. Because starting in triathlon so young I was always racing against adults and I never really even thought twice about the fact that there was maybe one or two people in my age group, I was focused on whoever’s in front of me. When I came to the high school events and was lining up all around girls my age it was just so much more fun because we could all relate and we all have the same things going on in our lives. When I went to high school practice, kids would stay around when the ride was over and just hang out doing wheelies and tricks. I feel like that is so valuable and it’s so missed when you don’t have that opportunity to play with your peers.

MTBK: What was the most challenging thing about participating in the NICA races for you? As a world-class athlete, did you find the competition satisfying at your NICA races?

Hannah: It was a different experience for me. There definitely was competition. I never went to a race thinking, “I’m just going to do the race.” It was never like that. The girls were strong and there were a lot of them. I think was most challenging was finding the time for it all.

Mountain biking does take more time than cross country running and some other sports. I was on the swim team. I was on the cross country team and I raced NICA. For me, the time commitment was challenging and I’m sure it was challenging for everyone. When running, I could just throw on my shoes, run for 45 minutes and call it a day and that was great after school and then you still have time to study and everything. With mountain biking, I couldn’t run and mountain bike. I couldn’t swim and mountain bike.

It’s really hard for someone to do high school mountain biking without either their high school having a very committed team that’s going to settle all these kids to the race- or without having a parent that’s going to drive them to the trails and manage logistics. It’s not like soccer where one parent can say, “Okay, this time I’ll drive the kids to the game. Okay, I have a minivan, six of you pile in,” or whatever it might be its like six kids and six bikes. So, even if one parent is willing or one club is willing, it really does take a lot to bring all the kids and the equipment and the bikes and whatever else.

Hannah Rae Finchamp - Clif Pro Team, BC Bike Race

Photo by Todd Weselake

MTBK: Did mountain biking affect your academic work in school?

Hannah: Once again, I was swimming and running and cycling. I feel like I had a lot on my plate but if anything I think it made it better because school always came first. If school ever were to slip then I wasn’t going to go to practice. I brought a lot of the dedication that I had on the bike to my school work as well. I’m really thankful for that because I loved school and I loved college and I love learning and I think that translates back-and-forth. Even on the bike I’m a very analytical person. I don’t just want to send it down the rocker. I want to know why based on physics or whatever else I can get my bike from here to there without crashing. (Read Ways Mountain Biking Can Help Your Kids Be Successful)

MTBK: Tell us about some motivational coaches you’ve had.

Hannah: I’ve been blessed with a lot of really fantastic coaches, two in particular really come to mind. One is the one that I have right now, Coach Chris Mileski. He started coaching me when I made the transition from triathlon to mountain biking. We really connect well and he’s motivating. For the first few years of working together, his mantra for me was ‘Always honor the process.’ We’d really talk about, if you can jump into this sport and be one of the best people right away what does that mean for the sport? It means it’s not that competitive. And so, he helped me take on the attitude of honor the process and be thankful for those finishes where you recognize, “Wow, I was not as fast as I wanted to be in this group of people,” because that’s what helps you grow and learn.

The other coach that really comes to mind is the coach that I had in high school. He was actually the swim team coach at my high school but he loved cycling and so my junior year he would take me out to go riding. Because I was a young girl, I couldn’t always ride the trails alone and he helped me start the mountain bike team at my high school. His name is Joe Zambrano and I think he is what so many high school coaches should be like. He was the person everyone wants to talk to. When I think of high school sports, he’s who I think of. Because there are so many people who joined the team just because they wanted him as a mentor. I think that is amazing.

About Hannah’s Sponsors

Hannah tells us, “I’m currently on the Clif Pro Team with the primary sponsor of Clif Bar. We are also sponsored by and grateful for the support of Fox, Maxxis, Sierra Nevada, Orbea, Shimano and more.”

Clif Bar
Fox mtb suspension
Maxxis mtb tires
Sierra Nevada
Orbea
Shimano

MTBK: What advice would you offer to high school coaches on how to get more girls on mountain bikes? NICA has even created a the GRiT program (Girls Riding Together).

Hannah: It definitely is a challenge and I think that’s probably the first thing to recognize is that it is going to be a challenge and what works for some might not work for others. I think at the end of the day, it’s about breaking down barriers. It’s about accessibility and it’s about community.

Regarding accessibility – I would really love to see more opportunities to try the sport without commitment, because I think that’s the hard thing. I think more girls would sign up if they could go for a ride and then say if they like it or not, because that’s not as intimidating to a girl. It’s hard to commit to something, especially when you don’t know if you’re going to be good or not. And just statistically speaking, girls are more self-conscious – especially during that age and that’s when you statistically see a lot more girls drop out of sports because their confidence goes down and they think, “Oh, maybe I can’t do this, it’s too hard.”

The GRiT program really does have it down, which is Girls Riding Together. Girls need other girls most of the time because I think people don’t realize that mountain biking is a social sport. Cross country was one of the biggest sports on campus because it was so fun to run together and chat and hang out – and it’s the same on the bike. I think the more girls we see come into the sport, it will exponentially grow because the girls in the sport will bring more girls, and so on.

MTBK: Are female coaches a big component of this too? Realistically, will a female coach make younger girls more comfortable riding bikes together?

Hannah: I think so. I coach and some girls have specifically sought me out because I’m female. It’s harder for the high school teams because I understand that whoever is running the team – they can’t change who they are. But yeah, I think adding a woman to all the team rosters makes a huge difference. Because it’s more relatable. Girls will say more things to women.

Hannah Rae Finchamp - BC Bike Race, loam

Photo by Todd Weselake

MTBK: What’s your most memorable biking experience?

Hannah: If I had to single out one I would pick the BC Bike Race last year. It actually gives me chills just thinking about it. That is where I actually met Kaysee Armstrong. We formed a good friendship there. We camped that whole week with everyone else participating at the race.

At the BC Bike Race, you’re camping and you’re eating whatever food they have, and you’re taking care of your own bike and everything else. Everything’s not going to be perfect. And it really taught me that it doesn’t have to be perfect in order to be great. That was a huge lesson I learned and I’ve been trying to carry it with me ever since then. It just showed me what I was capable of. Because sometimes when you have a staff around you and you have managers and friends and competitors and mechanics and everything else, it feels like your only job is to race, which is great. But when all that’s taken away, you learn that you’re so much more capable than you would ever think. That’s probably my favorite part of the sport.

MTBK: Did you have any “Oh, crap” moments at the BC Bike Race that put your independence to the test?

Hannah: My hardest moment, personally and mentally during that race was on the hardest and longest stage. It actually started on a descent and as we were coming down a big fire road and there was a huge water bar in the middle. With everyone there I didn’t know it was coming until everyone in front of me disappeared down into it and then came back up the other side and I just shot off the front and actually slammed into the other side of the water bar. After that, people started descending almost on top of me, I was just curled up in a ball in the bottom of this thing. I got up and all my stuff was everywhere. It was like two yard sales. I was bleeding. I’m thinking, “I have a really long ways to go.”

In that moment I thought I have a decision. I thought to myself, “This is a seven-day race. You’re not going to quit – you’re not going to. So, how do you want to handle it?” And I said, “I’m going to give myself 60 seconds and I can do whatever I want for the 60 seconds and then after that I’m not thinking about this again.” And everyone must have thought I was crazy. Just for the next 60 seconds I just talked a lot of crap like, “This is horrible. I’m in so much pain. Everything is terrible.” And then after 60 seconds it was just like, “Hey, I’m fine now.” You have to take advantage of those moments where you learn it, them push it away because you don’t want it to happen again.

MTBK: Where would you like to go mountain biking that you haven’t been yet?

Hannah: The answer to that question would be anywhere I haven’t been. Every time I ride a new trail I get so excited and I love travel. My goal in life is to visit at least 50 countries. So, the idea of traveling with my bike, in and of itself, is my dream. If I had to pick a place without even much knowledge, I would probably say Patagonia. I’m sure someone will say, “Why would you go there?” Honestly, I just want to go everywhere. So, it’s really hard for me to pick one location.

MTBK: Are you happy with where your fitness is right now?

Hannah: I’m really happy where my fitness is. It’s been a really exciting winter for me because I’ve gotten into new territory this winter. This is my first year entering the sport where I’m not a student as well. I graduated college in May. The preparation has been different and that has been exciting. Doing the same thing over and over again was Einstein’s definition of insanity. I’m excited to have done something different and to feel prepared.

I think a big goal for me this season is to expect the unexpected. One of my favorite things someone said to me one time is, “How fast would you be if you didn’t know how fast you are?” My goal is to enter this season with that mindset. So many times we stand on the start line, and count the people that we know and think, “Okay, well, for sure her, her, her, her – they’ll all beat me,” just based on history. But one day you have to step up and clear that history.

MTBK: It’s one thing to be at your level of racing, but it’s another thing to be competitive in a race at your level. What are the things that you’re focusing on to make that difference?

Hannah: I think the training is the first step. Training is a big deal – the way you train, the coach you have, matching your own physiology, training your weaknesses, racing your strengths. I think, once you get to a certain level, everyone’s doing those things. Everyone’s training hard. You look at social media and you can be either overly confident or overly intimidated. It seems like everyone’s putting in the mileage.

The things that make the difference are how you’re resting and then your mind. Those, I think, are the really big steps that I’ve been working towards this season – especially now that I’m not in school. I want to do all of those little things a little bit more perfectly. You take one step at a time. I think resting better and really exercising your mind the same way you do your body will make a difference.

Hannah Rae Finchamp - Mediterranean Epic, alley

Photo by Cano Fotosports

MTBK: When you were winning XTERRA World Championships what was your mindset then? Was it just like go out there, go as hard as you can and see what happens versus this additional mindset and mental preparedness? How does that compare six years ago?

Hannah: It’s so funny as I’ve asked myself that a lot of times as well because in mental preparation, that’s what you do. You think back to your most perfect races and you think how did I feel then. I’ve had a lot of great moments on the mountain bike that I could pull on to. I’ve won Collegiate national championships and I have those moments and I can think of what I felt then, but to think back to XTERRA worlds, it’s different for me. It’s hard for me to put myself there and I’ve come to the conclusion that I was so young then.

There just weren’t so many thoughts. I think that in and of itself, is a discovery. I think that’s so beautiful and that’s what I would encourage other high school kids to take advantage of. Not that you don’t have thoughts, because if someone had said that to me in high school I would have been like, “You are not inside my head.” But there’s a beauty in the years and in the fact that I didn’t have every single moment of the race necessarily calculated. I was just out there doing my absolute best. I would encourage kids to stick with what works for them and not let noise from the outside begin to cloud the quietness.

MTBK: How often do you lift weights or run as part of your training regimen?

Hannah: I lift weights twice a week and I start that during the offseason in November. I up the intensity all the way through about now in March and then I start a maintenance program throughout the season. There might be a few big blocks when I’m not racing as much but I mostly just stick with maintenance throughout the season and I keep it at twice a week. And then really the only time I run is during cyclo-cross season or during the off season.

MTBK: Is a day on the mountain bike mainly just climbing tough hills over and over?

Hannah: I do a lot of interval work so I spend quite a few days on the road, even if it’s still on my mountain bike. I like to do intervals on my mountain bike just because it is a slightly different feel than a road bike and so it’s more sports specific. Throughout the week, I’ll have maybe three really hard interval days and then depending on where we’re at, maybe less intense ones or aerobic rides where I am just going out and loving my bike. Over time you get so used to those parameters that you really can just relax, find your rhythm, and ride the trails. We’re so lucky here in Salt Lake and close to Park City. We have so many miles to explore. I’m really happy to be living here now.

MTBK: What are your favorite healthy foods?

Hannah: I love sweet potatoes. That’s probably my number one favorite. Sweet potatoes and then every Monday it’s salmon night at my house.

MTBK: My math could be wrong but you’re aging out of the U23 category this year, is that correct?

Hannah: It was actually last year for me. I’m 23 this year but I have a December birthday. It’s been brutal. I feel like that December birthday haunted me. I’m finally passed it. There’s no more aging out. I’m committed now and I’m not going to feel it anymore.

MTBK: What’s your upcoming race schedule?

Hannah: I’ll do the first two UCI Pro XCT races in California, Bonelli and Vail Lake. A few weeks after those I’ll go to Sea Otter.

Hannah Rae Finchamp - Mediterranean Epic, Beach

Photo by Cano Fotosports

Giro Disciple Helmet Review

label
Featured view of the Giro Disciple mountain bike helmet

Let’s face it. Comfort is a factor when choosing the best mountain biking helmet for your kids. Of course, safety features come first, but without comfort, your kid won’t fully enjoy the ride. The Giro Disciple MIPS helmet manages to balance both of these things – comfort and safety with ease. Plus, it has some interesting modern features.

Featured view of the Giro Disciple mountain bike helmet

Size Chart For The Giro Disciple Bike Helmet

Size (in)Size (cm)
Small20.5 - 21.7552 - 55.5
Medium21.75 - 2355.5 - 59
Large23 - 24.2559 - 62.5
Extra-Large24.5 - 25.562.5 - 65

These sizes are for the circumference of the noggin. Get out the tape measure and see what size you need. Our 15 year-old wears a medium. The EVO site tells us the small size weighs in at 1150 grams and the large weighs 1300 grams.

Detail of vents in the chin bar on the Giro Disciple
Goggles and the Giro Disciple mountain bike helmet

Safety Features For The Giro Disciple Mountain Bike Helmet 

Above all else, safety features matter and the Giro Disciple with MIPS protection has plenty of them. The exterior of the helmet is made of fiberglass with custom-injected gasket trimmings. The jawline contains some additional padding, in the form of vinyl nitrile, adding to the helmet’s overall impact cushioning power. On top of this, the MIPS system redirects the energy produced by an impact, protecting your child’s head should they fall mid-ride. On top of this, the visor bolts on (no tools needed) and there are also emergency removable cheek pads, just to provide some extra cushioning.

Giro Disciple full face helmet - manufacturer photo - side view
Giro Disciple full face helmet - manufacturer photo - rear view
Giro Disciple full face helmet - manufacturer photo - three quarter view

Comfort And Color Choices 

Thanks to the interior padding and the vented brow ports, the Giro Disciple is as comfortable to wear as it is safe. The vents allows in air, cooling down the head mid-ride, while the padding not only gives them some additional cushioning, but it prevents their head from pushing right up against the fiberglass helmet. We all know that this matters, as kids are more likely to complain less when wearing a comfortable helmet.

See current prices and color choice on: Backcountry | EVO | Jenson USA

Giro Disciple helmet for safety on the jumps
Giro Disciple full face helmet paired with a neck brace
The Giro Disciple helmet is a full-face helmet for mountain biking

What Our Kid Thinks 

We have the luxury of living close to the Backcountry warehouse in Salt Lake City and that allows us to have access to a lot of merchandise. We stopped by for a fitting for our 15 year old prior to a trip last year and he tried on several helmets before choosing this one. When asked why he chose the Giro Disciple, he said “I really like all the vents in this helmet because that helps make if comfortable. For enduro races, I can also remove the cheek pads so I have additional ventilation. I kind of have a Hawaii Five-O style going on right now, so I really like the graphics. The only thing I would change is how the chin strap fastens. I’d replace the old school d-ring with a buckle.”

Action camera attached to the Giro Disciple mountain bike helmet
Rear detail view of the Giro Disciple full face mtb helmet

Built In Action Camera Mount and Headphone Pockets 

Recording point of view rides with this helmet is easy as it comes with a built-in camera mount. With this integrated breakaway P.O.V. mount, you can hook up an action camera to the helmet and experience your womp rats’ trips down the trails later on, from the comfort and safety of your couch.

Inserting headphones in the Giro Disciple mountain bike helmet
Headphones inserted in the Giro Disciple full face mountain bike helmet for kids
Headphones concealed in the Giro Disciple mtb helmet

The helmet even has built-in speaker pockets that are compatible with Tuneups Audio Speakers and O-Snap Audio Cable management, making it simple for them to set up their smartphones and listen to their own riding playlists no matter which trail they’re on.

Use headphones responsibly and make good choices when riding. If you believe using headphones while riding will affect your safety or the safety of others – unplug or silence your device.

Final Thoughts

Overall, the Giro Disciple with MIPS protection is a full-face mountain bike helmet that checks many things off of the list. It’s impact resistant, has plenty of padding to make it comfortable, and the camera mount and speaker pockets are good contemporary technological features.

Tips For Selling Your Used Mountain Bikes

label
How to sell used mountain bikes - featured image
How to sell used mountain bikes - featured image

Tips For Selling Your Used Mountain Bikes – Spring is almost here and a lot of us will need to upgrade a kid’s mountain bike this season. Our youngest is growing into and extra small adult sized bike and we are actually looking forward to shopping around. In order to buy a new bike, we need to get rid of his old one. Over the years, we have been through this experience quite a bit. Do these tips apply to selling any complete used bike? You bet!

CALCULATE the the real cost of your used bike using this tool we built.

Cleaning up a used bike

Make Sure The Bike Is Safe And Functional

This may require a tune-up either done yourself or by your local bike shop. If you get a professional tune-up, put that information in your ad. Make sure all the bolts are tightened properly. If you need to replace brake pads or do a brake bleed – get it done. Make sure the bike shifts smoothly. This may require a new derailleur cable and adjustment. If you think new tires are in order, throw on a pair or replace those slow-leak tubes. Perhaps, the dreaded brake rotor rub is making an appearance. If so, center those brake calipers. If the suspension needs servicing, you either need to get it done or address the issue in your ad and adjust your price accordingly.

You certainly don’t want to have a potential buyer’s child taking the bike on a test ride and experience a mechanical issue which could affect their kid’s safety. They will think you’re a clod and you will be frowned upon.

Clean Up That Used Bike

NEVER take a bike to a car wash and use the high pressure sprayer. High pressure water will get into bearings, remove the grease and damage these parts. Just use a bucket with water, a dish washing brush, toothbrush and closths. Clean the drivetrain and give the chain a fresh dose of chain lube. On a bike we sold last year, there was a lot of scraped off paint due to a lock cable rub from transporting the bike. I color-matched a strip of vinyl to cover a most of the blemishes. When we sold the bike, I was sure to let the buyer know what was done and showed her before-and-after photos.

Take Good Pictures

Now your bike is all cleaned up, it’s time for a photo shoot. A decent smartphone will work fine for this task. Chances are you’re not a professional photographer, but you can put a little effort into getting decent photos. Make sure the bike is well lit. Don’t shoot into the sun or take photos where highlights wash out the details on the bike. Lean the bike against a tree so no one is in the picture. If you prop the bike up with a stick so it’s obscured by the rear wheel or it blends into the background, you get bonus points.

Take a lot of photos and choose the best ones. Your pictures should fill the frame well. If you’re shooting photos with a smartphone, for the love of Semenuk, hold it in landscape orientation. For the featured photo, get a shot of the full bike on the drivetrain side. Take pictures of the components that matter most: the brake levers, the rear derailleur and cassette, suspension, cranks and pedals (if included), brakes, saddle and seat post, wheels and tires. A total of 6-10 photos should do the trick. Importantly, if there are any major blemishes, be sure to include those in your shot list.

How to sell used kids bikes - full shot
How to sell used kids mountain bikes - shifter detail

Write An Informative Headline For Your Ad

This is really simple and important. It will lead to selling your bike faster. At the very least, include: the year the bike was made, brand, model, frame size and wheel size in your headline. For example, the headline “2014 Small Acme Coyote, 20in Wheels” is worthy of a Pulitzer Prize. It’s that easy. If you are allowed to make a longer headline, see what you can get away with. Adding “Upgrades” or “Like New”, or calling attention to a new tires or grips could help you out.

Include The Specifications And Upgrades In Your Long Description

Be brief and specific. Most parents looking for kids’ bikes are experienced mountain bikers. Moms and dads like you know the difference between various brake sets, wheels, suspension forks and everything else. When we list all the features of a bike we start with drivetrain specs, wheels, and move all the way to the saddle and cockpit. Be sure to include the standover height of the bike because regardless of frame size and tire size, this is the measurement that matters most.

Be Honest About The Overall Condition Of The Bike

I bought a bike a few years ago with some small stickers on the head tube and top tube. Duh – little did I know these decals where covering small chips in the paint. This was not a deal breaker, but I was a little bummed out over this. Is a bike really in “great shape” if the bottom bracket is chunky or the pulleys on the rear derailleur are worn out? Communicate all major blemishes scratches and dings on the bike. We like the statement “normal wear and tear”. It shows that the bike has been used, but it’s not used up.

When selling a bike last year, I color matched a piece of vinyl to the frame so I could cover rubbed spots on the down tube from a cable lock. I was sure to show these photos in my ad. And, do we put protective tape on our bikes now? You bet we do.

Bike for sale with blemishes
Covered down tube on mountain bike for sale

Do A Little Research And Set Your Price

Breaking news – people want the most bike for the least amount of money. It can be competitive. We set our prices on used kids’ mountain bikes by finding the competitor/similar bike with the lowest reasonable price and setting our price lower. For us, it’s just not worth responding to all inquiries and haggling over price, when and where to meet. If you’re not in a hurry to sell your bike, set a higher price and see what response you get. If you can wait weeks or months, good on ya.

Post Your Bike For Sale And Communicate With Responders

One of our local television news stations has an online marketplace where we get most of our bikes. Craigslist and local Facebook groups are also an option for mountain bike transactions. Your local bike club or trail organization may have an online buy/sell section. At our BMX tracks, people bring bikes for sale and tape on a cardboard sign with info and a phone number.

When we post online, we get texts more than phone calls. The first text always asks if the bike is still available. From there, detailed communication can begin. No matter how a series of communication with a potential buyer ends, always thank them for responding to your ad and thank them for their time.

Beware Of Scammers

We only sell our bikes in-person for cash. More than once, we have gone through a round of communication only to find that a buyer wants to buy a bike with a money order or digital transaction. This just won’t work. We block phone numbers from respondents who repeatedly want to negotiate a transaction via mail or the internet. Don’t be afraid to do this. Value your time and move on to real, earnest candidates.

Meet people in public places

Meet Potential Buyers In-Person At A Safe Public Place

If you don’t know the buyer, meet her/him at a place where there will be plenty of people around. Go ahead and bring an adult friend or family member with you if you think it will make you feel more safe. We have met our bike buyers at: a furniture store parking lot, restaurant parking lots, and a hardware store vestibule. Many of these places have security cameras, so that’s a bonus.

Always have an agreed upon price prior to meeting your buyer, but be prepared for additional negotiations. If a potential buyer sees the bike and wants to negotiate a lower price based its condition or anything else, it’s up to you to accept the lower price or refuse to sell. If a child will be test riding a bike when you meet someone, bring a helmet in case the potential buyer forgot to bring one for the kiddo.

We hope these tips help you sell your kids’ used mountain bike or your used bike. Selling a bike is often a necessary step to acquiring a new one. If you’re patient and follow these steps, you’re chance of getting a bike sold will increase. Good luck!

For more articles like this, follow MTBwithKids on Instagram or Facebook